Drains series EWS
The drainer EWS transports water or condensation water that has entered the enclosure on the surface because of sudden temperature changes and this reduces the oxidation of the electronics or the materials.
Drains M25 series EWS
Technical data
connection thread: | M25x1,5 |
wrench size: | 30 mm (1.18 inch) |
material: | Polyamid |
colour: | black |
degree of protection: | IP 65 |
temperature range: | -20 up to + 50°C |
special features: | adapted for the ex-area |
weight: | 0,014 kg |
included in scope of delivery: | drains |
Article numbers:
article number | thread size | SW mm (inch) | L1 mm (inch) | L2 mm (inch) | H mm (inch) |
EWLS/M25x1,5/oG | M25x1,5 | 30 (1.18 inch) | 19,7 (0.77 inch) | 3,8 (0.14 inch) | 23,5 (0.92 inch) |
Description:
- transports water or condensation water that has entered the equipment on the surface
You may find this also interesting:
Breathers and Drains EWLS IP66
Pressure compensation elements GH02/DAE
Breathers series ELS
Drains M12 series EWS
Technical data:
connection thread: | M12x1,5 |
wrench size: | 17 mm (0.67 inch) (special counter nut 18 mm (0.71 inch) included) |
protection degree: | IP56 |
sealing-ring: | EPDM |
material: | PA 6 (V2) |
temperature range: | -40°C up to +100°C |
tightening torque: | 0,5 Nm |
colour: | RAL 7001 (silver grey), RAL 7035 (light grey), RAL 9005 (deep black)) |
water flow: | 30±5 ml / min = 1.8 lt/h at ▲p = 1 mb |
included in scope of delivery: | special counter nut 18 mm (0.71 inch) |
Article numbers:
EWS/M12x1,5/mG/1 (RAL 7035)
EWS/M12x1,5/mG/2 (RAL 7001)
EWS/M12x1,5/mG/3 (RAL 9005)
Description:
- its small size enables a space-saving mounting and simultaneously a high water flow
- are suitable especially for enclosures with low protection degrees to deviate arising water
- caused by special vertical openings the water is trooping up centrically around the drainage holes and runs-off directly by mounting of the lug on the deepest point of the enclosure
- due to their type of construction, any liquid can escape at any time but is prevented to irrupt from outside into the enclosure
You may find this also interesting:
Drains and Breathers IP66: series EWLS IP66
Drains and Breathers IP64: series EWLS IP64