1
| rump profiles | Aluminum frame profiles, natural anodized with dividers in 25 mm grid, guide spring for enclosures separation |
2
| between partial profiles | Aluminum frame profiles, natural anodized with dividers in 25 mm grid, guide spring for enclosures separation |
3
| cover part profiles | Aluminum frame hollow sections, natural anodised with dividers in 25 mm pitch, guide groove for enclosures separation |
4
| HT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
5
| ZT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
6
| DT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
7
| housing plate | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically. |
8
| cover plate | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically. |
9
| connecting bolts | Steel M4, self-locking |
10
| profile seal | foam rubber cord, encircling |
11
| panel bonding | permanently elastic, sealing |
