Design W-2230-GK
Features of this design
Operating position: Lying (front handle)
- Locks in front, hinges in the back
Dimensions
Dimensions | Min. - Max. inside dimensions in mm |
|---|---|
| X = width | 200,0 - 1000,0 (in 0.5 mm increments) external dimensions: + 21,0 mm |
| Y = length | 100,0 - 500,0 (in 0.5 mm increments) external dimensions(incl. fittings): + ca. 65,0 mm |
Z = height Z3 = height cover part above |
|
Note:
In this design (front handle), the dimension Z is always smaller than the dimension Y.
Lid opening types
| Code | Lid top Z3 | locks | hinges |
|---|---|---|---|
| 311 | 95° to the rear | ahead | behind |
| 321 | 120° detachable to the rear | ahead | behind |
| 331 | 180° to the rear | ahead | behind |
| 333 | 180° to the left | right | left |
| 334 | 180° to the right | left | right |
| 341 | 180° to the rear with friction | ahead | behind |
| 356 | removable upwards | laterally | - |
Note: Lid top Z3: Code 333 and 334 is very beneficial for keyboard, laptop, etc. installation. The opening code 321 and 356 is very advantageous for the installation of an intermediate flap as an accessory compartment.
| Code | Lid bottom Z1 | lock | hinges |
|---|---|---|---|
| 111 | 95° enclosures Z2 to the rear | ahead | behind |
| 121 | 120° enclosures Z2 detachable to the rear | ahead | behind |
| 131 | 180° enclosures Z2 to the rear | ahead | behind |
Note: Lid bottom Z1: As an accessory tray or for service very beneficial. The accessory compartment requires an intermediate plate in the housing Z2, otherwise an intermediate flap must be installed in the cover Z1.