Design W-2630-GK
Features of this design
Operating position: Standing (handle above)
- locks left and right or above
Dimension designations
| Dimension designations | Min. - Max. Inside dimensions in mm |
|---|---|
| X = width | 200,0 - 800,0 (in 0.5 mm increments) external dimensions: + 21,0 mm |
| Y = height | 100,0 - 600,0 (in 0.5 mm increments) external dimensions(incl. fittings): + ca. 65,0 mm |
| Z = depth (Z1+Z2+Z3) Z1 = deep lid part at the back Z2 = deep enclosures part center Z3 = deep lid part in front |
|
Note:
In this design (handle above), the dimension Z is always smaller than the dimension Y.
Lid opening types
| Code | Lid front Z3 | locks | hinges |
|---|---|---|---|
| 356 | removable forward | laterally | - |
Note: Lid front Z3:
This lid opening is only forward. Cover particularly suitable for the installation of a front panel for keyboard, laptop or an intermediate flap with storage compartment for accessories.
| Code | Cover rear Z1 | locks | hinges |
|---|---|---|---|
| 155 | removable to the rear | left and right | - |
| 115 | 95° to the rear, then tilted enclosures Z2 forward | left and right | below |
| 125 | 120° retractable to the rear, then tilted enclosures Z2 forward | left and right | below |
| 135 | 180° to the rear, then enclosures Z2 tilted forward | left and right | below |
Note: Rear cover Z1:
The opening type Code 155, 125 and 135 is very advantageous for the installation of an intermediate flap as an accessory compartment. The opening code code 115 is very advantageous as a service flap.