Design W-2120-GK: Enclosures profiles
| Pos. | Construction designation | Material |
|---|---|---|
| 1 | under partial profiles | Aluminum frame profiles, natural anodized with dividers in 25 mm grid, guide spring for enclosures separation |
| 2 | cover part profiles | Aluminum frame hollow sections, natural anodised with dividers in 25 mm pitch, guide groove for enclosures separation |
| 3 | UT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
| 4 | DT-corner connectors | Polyamide, reinforced, with recessed M4 nuts for self-locking screw connection of the side walls, rounded outside and inside right-angled |
| 5 | baseplate | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically. |
| 6 | coverplate | Aluminum 2.0 (2.5) mm, natural anodized. Glued into the profile frame elastically. |
| 7 | connecting bolts | Steel M4, self-locking |
| 8 | profile seal | foam rubber cord, encircling |
| 9 | panel bonding | permanently elastic, sealing |