Plastic enclosure series KS135

1 enclosure - many variations - from quantity 1

The enclosure series KS135 convinces with different variations. It protects your electronics both indoors and outdoors. The robust plastic enclosure is available with a snap-in or screw lock which can be ordered either vented (with integrated pressure compensation membrane) or not vented. Circuit boards with different thicknesses can be accommodated. There are also various options for mounting, e.g. wall or mast mounting.

Choose between snap-in or screw locking below:

with snap-in lock with screw lock

With snap-in lock:

Plastic enclosure series KS135 version snap-in lock

Technical data:

material:	polycarbonat
degree of protection:	IP 66/67/69 - acc. to VDE 0470/ DIN 40050/ EN 60529
colour:	grey (similar to RAL 7042)
temperature range:	-40°C to 100°C
versions:	snap-in lock, optionally with or without ventilation
modifications:	suitable foil keyboards, mechanical processing, input systems, surface finishing (EMI, ESD, MED, ...) and much more are possible at any time
special features:	wall-, panel- and pole- mounting possible available from quantity 1
info:	front panel (cover) must be ordered separately!

Benefit:

Compact enclosure design for a wide variety of applications e.g. Iiot gateways
Installation of different circuit board thicknesses
Optional accessories for wall and pole mounting
PCB connection technology
Integrated tamper protection
Protection of the electronics against thermal and mechanical environmental influences
Suitable for indoor and outdoor use
An integrated pressure compensation membrane for fluctuating ambient pressures, depending on the version

Article numbers for enclosures with snap-in lock:

Description:	Article number:	Dimensions (mm / inch):
Description:	Article number:	width	x	height	x	depth
Ventilated enclosure	GH02KS135-010	97,0 / 3.81	x	86,0 / 3.38	x	45,0 / 1.77
Non-vented enclsoure	GH02KS135-020	97,0 / 3.81	x	86,0 / 3.38	x	45,0 / 1.77
Front panel for snap-in lock	GH02KS135-FP-RAST	97,0 / 3.81	x	15,0 / 0.59	x	42,0 / 1.65

Accessories:

Here you can find our complete range of accessories ->

With screw lock:

Plastic enclosure series KS135 version screw lock

Technical data:

material:

polycarbonat

degree of protection:

IP 66/67/69

colour:

grey (similar to RAL 7042)

temperature range:

-40°C to 100°C

versions:

screw locking,
optionally with or without ventilation

modifications:

suitable foil keyboards, mechanical processing, input systems, surface finishing (EMI, ESD, MED, ...) and much more are possible at any time

special features:

wall-, panel- and pole- mounting possible
available from quantity 1

info:

front panel (cover) must be ordered separately!

Benefit:

Compact enclosure design for a wide variety of applications e.g. Iiot gateways
Installation of different circuit board thicknesses
Optional accessories for wall and pole mounting
PCB connection technology
Integrated tamper protection
Protection of the electronics against thermal and mechanical environmental influences
Suitable for indoor and outdoor use
An integrated pressure compensation membrane for fluctuating ambient pressures, depending on the version

Article numbers for enclosures with screw locking:

Description:	Article number:	Dimensions (mm / inch):
Description:	Article number:	width	x	height	x	depth
Ventilated enclosure	GH02KS135-030	97,0 / 3.81	x	86,0 / 3.38	x	45,0 / 1.77
Non-vented enclsoure	GH02KS135-040	97,0 / 3.81	x	86,0 / 3.38	x	45,0 / 1.77
Front panel for screw locking	GH02KS135-FP-SCHRAUB	97,0 / 3.81	x	15,0 / 0.59	x	42,0 / 1.65