BendLine® 45°-bending

material:	aluminum
colour:	standard: light gray (similar to RAL 7035), special painting you can find here ->
versions:	Design stripes in 10 different colours On request other designs (bending angle, fittings, versions for front and back panel) are possible Wide range of accessories (z.B. feets, handels, cable glands mounting plates, ect.) available
special features:	suitable foil keyboards, mechanical processing, input systems, surface finishing (EMI, ESD, MED, ...) and much more are possible at any time Contact us, we will advise you

Design stripes in 10 different colours for BendLine®-enclosures

Here you can find an overview about front panel
countersunk, without screws in front and back panel.

Here you can find an overview about front panel
countersunk, with 4 screws in front and back panel.

Here you can find an overview about front panel flush,
with 2 screws in front and back panel.

Here you can find an overview about front panel flush,
with 4 screws in front an back panel.

enclosure heights: 60 mm/ 2.36 inch, 80 mm/ 3.15 inch,
100 mm/ 3.94 inch and 120 mm/ 4.72 inch
standard dimensions for half Eurocard 80 x 100 mm
(3.15 x 3.94 inch), eurocard 160 x 100 mm (6.3 x 3.94 inch)
and double eurocard 160 x 200 mm (6.3 x 7.87 inch)
prepared for insertion of circuit borads or mounting plates in thicknesses of 1.5 and 2 mm
front and back panel in different versions available:
without screws or with 2/4 screws fixed
front and back panel in flush and countersunk available
top and base part with bendings in 90°, 45° and R10 available