Plastic Enclosures

Module-enclosure Series 4000

This modular enclosure for M36 DIN-rail, series REX 4000, is designed for automations equipment and can be used with pluggable terminals, D-subs or other kind of connectors in the front.
Holes in the front and sides are available according to customers wishes.
A standard pluggable terminal (like Phoenix or any other connector) is mounted with the other components to the PCB. The side parts and front are screwed to the PCB and slid into the box. The wire part is then just screwed in.


  • Easy, quick and therefore low cost assembly of the unit
  • No wires need to be soldered etc.
  • Easy test of the unit.
  • The number of terminals needed is configurable and suits to the different applications. So lower costs and no mismatch of the wire/installation are possible.
enclosure for M36-DIN-railenclosure Series 4000
enclosure for M36-DIN-railenclosure Series 4000
Upper part
Material Lexan 940
Colour Grey (RAL 7035)
Inscription in the desired colour by laser marking (for realised sample have a look at series 1050)
Max. temperature 100°C
Build-in width 149 mm / 5.87 inch
Self-extinguishing Acc. to UL94-VO
IP-protection class IP 20
Terminals up to 2 x 23 plugable or D-sub
Base part
Material Lexan 940
Colour Grey (RAL 7035)
Max. temperature 100°C
Mounting DIN-Rail (EN50022)
Self-extinguishing Acc. To UL94-VO

Front grey and side part with 2 holes or 1 hole

Front grey
side part with 2 holes or1 hole
Type 4000: Order number: Drawing (download):
Complete consisting of front part enclosure front/cover for series 4000 light gray RAL 7035 with 4 screws,
Side part with 2 holes/complete open for 22-pin terminal, Base part light gray RAL 7035 without transparent cover
Front/Cover grey, incl. 4 screws 4969014001 pdf-file
Front/Cover transparent with aperture 4911641005 pdf-file
Base part, grey with hutsclip 4969014003 pdf-file
Terminal type 257/9, HO/A, PC part 1155708590  
Terminal type 256/9, wire part 1155608090  
Side part with 2 holes for 2 x 9-pin terminal 4969014007 pdf-file
Side part with 1 hole/complete open for 22-pin terminal 4969014006 pdf-file

Laser Marking

The terminal labeling is continuous and efficient means of laser marking.
For more information on the technology of laser marking you can find here ->

Laser Marking
Laser Marking

You may find this also interesting:

DIN rail enclosure made of aluminium can you find here ->

Call us: +49 7081 9540-0

or we call you back:

arrange a video / web conference

For information on the use of data entered here.

The request was successfully sent,
we call you back!