Plastic enclosure series KS103

This very robust plastic enclosure series (made of glass fiber reinforced
POLYESTER!) Is ideally suited as a distributor and connection housing in general
industrial use or mechanical engineering and automation technology. Due to the
design, these housings are also very suitable for installation of terminals on top
hat rails.

The KS103 enclosure series is maximally corrosion-resistant and vandal-proof
and is therefore suitable for use in unprotected outdoor areas and public areas.
A very high mechanical (impacts up to 7 joules according to EN 60529) and chemical resistance (to certain acids, oils or fats) characterize these housings
and enable them to be used especially in chemically aggressive environments
such as the food or chemical industry.

Thanks to the extensive range of sizes and versatile accessories, almost every application can be covered.

Technical data:

material:	fibreglass-reinforced duroplastic polyester UL94V-0
degree of protection:	IP 66 - to VDE 0470 / DIN 40050 / EN 60529
colour:	squirrel grey (similar to RAL 7000)
temperature range:	- 40° C to + 90° C, PUR-(Polyurethan) gasket, closed pore foamed - 60° C to + 130° C, silicone gasket - 40° C to + 100° C, CR-(Chloropren) gasket, closed pore foamed (round seal)
impact resistance:	> 7 Nm, EN 50014
protective insulation:	completely insulated acc. to VDE 0100
surface resistance:	> 1012 Ohm acc. to DIN 53482
puncture strength:	18KV/mm
versions:	special colours are possible (a paint for outdoor use is recommended on polyester substrate only depending on the mounting situation)
modifications:	suitable foil keyboards, mechanical processing, input systems, surface finishing (EMI, ESD, MED, ...) modifications are always possible
special features:	standard enclosure ready to receive mounting rails and mounting plates, terminal blocks and other electromechanics, closed-pore foamed seals
included in scope of delivery:	top and base part, seal, captive stainless steel screws, base part with 2 or 4 earthing screws